Structure de tuyau d'eau à haute pression, chaudière, tête de manifold avec garantie d'un an pour les applications industrielles
Détails du produit
| Taper: | Circulation naturelle | Structure: | tube à eau |
|---|---|---|---|
| Pression: | Haute pression | Style: | Horizontal |
| Carburant: | Biomasse/Déchets Chaleur, déchets, biomasse, charbon | Sortir: | Eau chaude |
| Matériel: | Acier en carbone, acier en alliage, nd acier | Poids: | 1-20 tonnes |
| Diamètre (OD): | 76mm ~ 914mm | Longueur maximale: | 23000mm |
| Plage de température: | 300 ~ 1500 ℃ | Emballage: | cadre en fer |
| Condition: | NOUVEAU | poids (kg): | 1000 |
| Usage: | Industriel | ||
| Mettre en évidence |
Tête de chaudière à haute pression,Structure du tube à eau Têtes de chaudière à vapeur,Garantie d'un an pour les en-têtes de panneaux muraux à eau |
||
Description du produit
| Diamètre (OD) | ¢76mm~¢914mm |
|---|---|
| Longueur (Max) | 23000mm |
| Température (℃) | 300~1500 |
Points forts du produit
Capteurs de collecteurs de chaudière à haute pression certifiés ASME pour les centrales électriques industrielles. Construction en acier allié/carbone durable, dimensions personnalisables (76-914 mm OD) et garantie d'un an.Idéal pour les applications de transformation des déchets en énergie avec des normes de sécurité élevées- Assistance après-vente en ligne fournie.
Chaudière à haute pression de puissance chauffage de la surface de la membrane de la paroi soudage à l'arc d'argon pour chaudière à biomasse
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
Économiseur de tubes H Fin à haute fréquence pour chaudière de centrale électrique ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Acier au carbone SA192 Superchauffeur en bobine soudage à l'arc d'argon 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Chaudière industrielle SA210A1 chaudière en acier économiseur d'échangeur de chaleur partie Certification ASME
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Veuillez utiliser notre formulaire de contact en ligne ci-dessous si vous avez des questions, notre équipe vous contactera dès que possible.
